FAQ

  • FAQ

FAQ

 Quickly and easily find answers to your questions about leecom products. Our "Q & A database" contains useful tips and answers to frequently asked questions. First, choose a theme on the bottom, and quickly find the information you need.

Please select a topic

Aquarium and base cabinet (3)

1. Do the fish tank and the base cabinet are supported to leave the factory together?

We only sell a fish tank or the base cabinet respectively, but you can buy them together according to your own needs.


2. How many colors of the fish tank and the base cabinet?

At present, we have six standard sizes of black and white XP & XC & XT & XE Aquariums and the base cabinet also has the same colors. We have XF plastic tank with the colors of white, pink, blue and there are two specifications for your choices;    

About XQ fish tank series，We have pink, blue and green colors, and there are three different sizes which can meet your travel needs. XA & XK aquarium series are all transparent colors.


3. What’s the difference between XP & XC, XT & XE? What accessories are included in the fish tank?

The difference between XP & XC is that, XP is right-angled fish tank while the edge of XC is curved. And they are all with cover and equipped with energy-saving lamps, LED lights and the upper filter.
The difference between XP & XC is that, XT is right-angled fish tank while the edge of XE is curved. And they are open fish tank and equipped with professional aquatic LED lights and the upper filter.


Lighting (2)

1. 1. How many colors of the light source? What's the material composition of the LED light?
The light sources are cold white, blue and white light, red and white light while the light stands are silver and black. LED lights are made up of electrophoresis aluminum, high-brightness LED light bar, ABS engineering plastic parts, high transparent acrylic waterproof plate and other accessories.


2. 2.What’s the difference between LD-0 Series and LE-0 series?
LD-0 series is in a fixed manner on both sides and it can be adjusted slightly.
LE-0 series of back bent arm is fixed, multi-angle adjustment.


Filter (3)

1. Can the filter material replacement be purchased separately?

Filter material replacement can be purchased separately and can be replaced at any time, giving a fish tank a clear environment.


2. What is the rotor?

The rotor is a permanent magnet that drives the impeller to rotate and is also a permanent magnet pump powered device. And it should be made to ensure quiet operation every 12 months.


3. When the filter gets noisy, how should we deal with it?

The reasons why the filter gets noisy are as follows:

1. There is air into the motor; 2.There are foreign bodies on the rotor;                             3. The rotor and shaft worn badly ; 4. The plastic parts are not installed in place.

The corresponding solution is:

1.Place the filter below the level; 2.Clean the foreign material in the rotor;                       3.Replace the maintenance pump head again; 4. Reassemble in the correct way.


Pump (2)

1. How should we solve with it when there is a big operating noise?

When the compression rubber is damaged, replace the air compression system; when the bottom of the intake port is clogged, clean up the foreign bodies on the cotton of air inlet filter. The air pump will be placed at the level of the table and there must not have a foreign body around it.


2. Exhaust gas is small

When the bottom of the intake port is clogged, clean up the foreign bodies on the cotton of air inlet filter; when air tube is clogged, please keep the pump open; when the air stone is blocking up, replace a new air stone.


go top